14 101/318 ED 1/10 RV1D VARIABLE DISPLACEMENT VANE PUMPS WITH DIRECT PRESSURE ADJUSTER SERIES 10 OPERATING PRINCIPLE — The RV1D pumps are variable displacement vane pumps with mechanical pressure compensator. — The pressure compensator keeps the cam ring of the pumping group in the eccentric position with use of an adjustable load spring. When the delivery pressure equals the pressure corresponding to the spring setting, the cam ring is moved toward the center instantaneously, adjusting the flow rate to the values required by the plant. — Energy consumption is reduced and adequate in every…
File type: application/pdf
Referenced at:
14 101/318 ED 1/10 RV1D VARIABLE DISPLACEMENT VANE PUMPS WITH DIRECT PRESSURE ADJUSTER SERIES 10 OPERATING PRINCIPLE — The RV1D pumps are variable displacement vane pumps with mechanical pressure compensator. — The pressure compensator keeps the cam ring of the pumping group in the eccentric position with use of an adjustable load spring. When the delivery pressure equals the pressure corresponding to the spring setting, the cam ring is moved toward the center instantaneously, adjusting the flow rate to the values required by the plant. — Energy consumption is reduced and adequate in every…
File type: application/pdf
Referenced at:
14 201/418 ED 1/12 RV1P VARIABLE DISPLACEMENT VANE PUMPS SERIES 10 OPERATING PRINCIPLE HYDRAULIC SYMBOL — RV1P are variable displacement vane pumps with hydraulic operated pressure compensator, that permit instantaneous adjustment of the flow rate according to the circuit requirements. Energy consumption is reduced and adequate in every cycle phase. — The pumping group is provided with double hydrostatic axial compensation, that improves the volumetric efficiency and reduces wear of the components. Both internal paths for inlet and outlet are double. — The pressure compensator operates keeping…
File type: application/pdf
Referenced at:
41 440/122 ED 1/12 41 440/122 ED DSP1* DIRECTIONAL VALVES, PILOT OPERATED, SOLENOID OR HYDRAULIC (DSC1*) ACTUATED — The DSP10 and DSP11 are 4-ports directional valves, pilot operated, solenoid actuated, with mounting surface according to ISO 4401-10 standards. The DS*11 valves have ports Ø48. — The directional valves DSC10 and DSC11 are the versions with hydraulic actuation. — They are available with different spool types (see point 2) and with some options for the opening control. — The DSP* valves are available with internal or external pilot supply and internal or external drain. A version…
File type: application/pdf
Referenced at:
41 430/123 ED 1/14 41 430/123 ED — The DSP8 are 4-ports directional valves, pilot operated, solenoid actuated, with mounting surface according to ISO 4401-08 standards. — DSC8 are the hydraulic actuated versions. — A high pressure version (H) is available. — These valves are available with different spool types (see points 2 and 3), with some options for the opening control. — They are available also with zinc-nickel surface treatments, that ensure a salt spray resistance up to 600 hours. MOUNTING INTERFACE DSP8 DSP8H Maximum operating pressure - ports P - A - B - port T (external drainage) -…
File type: application/pdf
Referenced at:
DSE5G je 4-cestný, 3–polohový resp. 2–polohový proporcionálny rozvádzač bez spätnej väzby s montážnou plochou podľa ISO4401-05. Viac informácií...
RV1P sú regulačné lamelové hydrogenerátory s hydraulickým kompenzátorom. Hydraulický kompenzátor tlaku neustále „porovnáva“ nastavenú hodnotu tlaku na kompenzátore s pracovným tlakom. Viac informácií...
RV1D sú regulačné lamelové hydrogenerátory s mechanickým kompenzátorom. Mechanický kompenzátor tlaku udržuje mechanicky (pružinou) zdvihový krúžok čerpadlovej skupiny v excentrickej polohe. Viac informácií...
DSP8 sú dvojstupňové rozvádzačes elektro-hydraulickým ovládanímpre montáž na dosku s montážnym obrazcom ISO 4401-08 (svetlosť Ø25). Viac informácií...
DSPE sú dvojstupňové elektrické proporcionálne rozvádzače bez spätnej väzby s montážnym obrazcom v súlade s normou ISO 4401. Viac informácií...
