RN 19 · GB DESCH Slipping Hub Load holding friction safety clutch 2 • Slipping hub with high power density due to special material • Overload protection up to 50.000 Nm • Torque can be set precisely for a wide power range • Surface is galvanized and passivated • Easy to install and operate Main features of the DESCH slipping hub: 3 Dimension d1, d2 and L3 according to customers requirement Number of springs depending on the maximum slipping torque Size RN max. slipping torque d1 max. d2 D3 TK D4 D5 D6 L1 L2 L3 L4 15 15.000 Nm 100 130 180 275 325 325 258 50 230 45 25 25.000 Nm 140 150 250 350…
File type: application/pdf
Referenced at:
www.thomsonlinear.com Handling Components Product groups • Low weight means easy to handle and install • Five basic sizes • Can handle loads up to 600 kg • Anodised aluminium profiles • Quick installation • Modular design • Easy to install suspensions • No welding required at installation • Large number of trollies for different requirements available • Broad range of options available • Light weight belt driven unit in four sizes • Extruded aluminium profile • Easy to install • Speed up to 5 m/s • Stroke up to 20 m • Load up to 600 kg • Up to four trollies per unit possible • Suitable gear…
File type: application/pdf
Referenced at:
11 102/123 ED 1/14 GPA* EXTERNAL GEAR PUMPS SERIES 10 HYDRAULIC SYMBOL OPERATING PRINCIPLE TECHNICAL SPECIFICATIONS PUMP GPA1 GPA2 GPA3 Displacement range cm3/rev 1 ÷ 7.5 4.5 ÷ 31.7 22 ÷ 61 Continuous operating pressure (NOTE) bar up to 260 up to 260 up to 250 Max rotation speed (NOTE) rpm 4000 4000 3000 Rotation direction clockwise or anticlockwise Loads on the shaft radial and axial load are not allowed Max torque applicable to the shaft see point 11.1 Hydraulic connections european flanged or BSPP threaded Type of mounting 4-holes flange - rectangular type Mass kg 1.3 ÷ 1.9 3.3 ÷ 4.6 5.8 ÷…
File type: application/pdf
Referenced at:
41 440/122 ED 1/12 41 440/122 ED DSP1* DIRECTIONAL VALVES, PILOT OPERATED, SOLENOID OR HYDRAULIC (DSC1*) ACTUATED — The DSP10 and DSP11 are 4-ports directional valves, pilot operated, solenoid actuated, with mounting surface according to ISO 4401-10 standards. The DS*11 valves have ports Ø48. — The directional valves DSC10 and DSC11 are the versions with hydraulic actuation. — They are available with different spool types (see point 2) and with some options for the opening control. — The DSP* valves are available with internal or external pilot supply and internal or external drain. A version…
File type: application/pdf
Referenced at:
41 410/123 ED 1/14 41 410/123 ED — The DSP5 and DSP5R are 4-ports directional valves, pilot operated, solenoid actuated, with mounting surface according to ISO 4401-05 standards. — DSC5 are the hydraulic actuated versions. — A high pressure version (H) is available. — These valves are available with different spool types (see points 2 and 3), with some options for the opening control. — They are available also with zinc-nickel surface treatments, that ensure a salt spray resistance up to 600 hours. DSP5 DSP5H Maximum operating pressure - ports P - A - B - port T (external drainage) - port T…
File type: application/pdf
Referenced at:
83 270/121 ED 1/16 — The DSE5G* are proportional directional control valves, direct operated, with integrated electronics and mounting surface compliant with ISO 4401-05 standards. — They are used for the control of position and speed of hydraulic actuators. — Valves are available with different types of electronics,with analogue or fieldbus interfaces. — A solenoid current monitoring signal is available. — The valves are easy to install. The driver manages digital settings directly. DSE5G* PROPORTIONAL DIRECTIONAL CONTROL VALVE WITH INTEGRATED ELECTRONICS HYDRAULIC SYMBOLS (typical) MOUNTING…
File type: application/pdf
Referenced at:
21 SUCO Transmission Technology Electromagnetic Clutches and Brakes Customized Solutions Centrifugal Clutches and Brakes 2 1 Welcome to SUCO What you'll see on the following pages: SUCO PRESSOSTATS MÉCANIQUES TRANSMETTEURS DE PRESSION SUCO SUCO – A transmission technology specialist active on the global stage SUCO – A success story SUCO – Tradition and innovation SUCO worldwide – our international sales network Page 40 Page 3 Page 4 Page 6 SUCO CENTRIFUGAL CLUTCHES AND BRAKES Technical explanations F-Type – Self-increasing clutch S-Type – Pin-guided clutch with three fl yweights W-Type –…
File type: application/pdf
Referenced at:
143 2 Rulli per trasportatori con comando a catena Rollers for chain driven conveyors Rulli comandati con pignone P1C - P2C Pinion sprocket driven rollers P1C - P2C Rulli comandati con corone 1C - 2C Crown sprocket driven rollers 1C - 2C Serie 135: rulli comandati 135 series: driven rollers Rulli con ruota libera Free wheel rollers Serie 138: rulli frizionati 138 series: friction rollers Serie FDN-FDR: rulli frizionati FDN-FDR series: friction rollers 144 150 156 166 170 182 Serie 139 139 series 162 144 Rulli comandati con pignone P1C - P2C Pinion sprocket driven rollers P1C - P2C 2 RULLI…
File type: application/pdf
Referenced at:
Original KEM Dokument: ECO-Ex_D_DE_220101_E008 | Copyright KEM, Änderungen und Irrtümer vorbehalten ECO Serie Impulsverstärker Einzel- und Doppelabgriff mit Frequenzausgang MERKMALE • Kompakte Bauart für Volumenzähler • Mediumstemperaturen bis +150 °C [+302 °F] • Skalierbare Analog- und Digitalausgänge • Erkennung der Durchflussrichtung • Kundenkonfigurierbar • Linearisierung mit bis zu 20 Punkten • Integrierte Temperaturmessung NUTZEN Passend für alle mechanischen Zähler Große Applikationsvielfalt mit einem Gerät Benutzerfreundlich - gleiche Funktionalität für alle mechanischen Zähler Kurze…
File type: application/pdf
Referenced at:
107 Varenr. Item no. Type Tegning Drawing B Børstelængde Brush length T Totalhøjde Total height 57.400/3E A 10 mm 26 mm 57.401/3E A 14 mm 30 mm 57.402/3E A 24 mm 40 mm 57.408/3E A 34 mm 50 mm 57.403/3E B 25 mm 50 mm 57.410/3E B 35 mm 60 mm 57.405/3E B 45 mm 70 mm 57.404/3E C 40 mm 90 mm 57.406/3E C 60 mm 110 mm 57.411/3E C 80 mm 130 mm 57.407/3E C 100 mm 150 mm 57.412/3E C 120 mm 170 mm 57.413/3E C 150 mm 200 mm Varenr. Item no. Type Tegning Drawing B Børstelængde Brush length T Totalhøjde Total height 57.440/3E D 10 mm 17 mm 57.441/3E D 14 mm 21 mm 57.442/3E D 24 mm 31 mm 57.445/3E D 34 mm 41…
File type: application/pdf
Referenced at: